How to Remove Bifold Doors Without Bottom Track?

Do you want your old bifold door gone? But what if it sticks, or there’s no bottom track? So you wonder: how do I remove bifold doors without bottom track? Good news: it’s not hard.

You don’t need to be a handyman. You don’t need special tools. But you do need a little patience and a clear guide. Let us tell you how to remove bifold doors without bottom track, step by step. No guesswork. No confusion. Let’s get started.

How to Remove Bifold Doors with Top Track (Without Bottom Track)?

Bifold doors in Los Angeles are built with two or more panels that fold together when you open them. These panels are connected by small hinges and usually hang from a top track. Some types have a bottom track, too, but not all. If your bifold door doesn’t have a bottom track, then the entire weight and movement are handled by the top track and pivot pins. That’s why removing the door means focusing on those parts.

Let’s walk through it slowly. This is how to remove bifold doors without bottom track in Los Angeles in a way that’s safe and simple.

Step 1: Open the Doors Fully

Start by opening the bifold doors all the way so both panels are lying flat and stretched out. They should be in a straight line, not folded. This gives you room to work and helps you see where the pins and rollers are located.

Check out our bifold patio doors.

Step 2: Lift the Door Panels Upward

With the doors open, place your hands near the top and gently lift the entire panel upward. Even if there’s no track at the bottom, some doors may have a small bottom pivot pin or bracket. Lifting helps free the pin and takes pressure off the hinges.

Step 3: Find and Compress the Top Pivot Pin

Look at the top corner of the door that’s closest to the door frame. You’ll see a pin that holds it in place, called the pivot pin. Push this pin upward with your fingers or a flathead screwdriver. It should slide up into the door since it’s spring-loaded. While holding it up, tilt the door slightly toward you. This will loosen that corner from the frame.

Step 4: Slide the Roller or Guide Pin Out of the Track

Now, move to the middle or opposite side of the top track. This is where you’ll see a roller or guide pin. This piece slides back and forth when you open the door. Carefully slide this pin toward the open side of the track. If it feels stuck, it might be clipped into a snug plastic piece called a snugger. A little wiggling should loosen it. Please don’t yank! Just move slowly and firmly.

Step 5: Remove the Door from the Top Track

Once both the pivot pin and the roller are out of the track, the door should be free. Carefully lower it and set it aside. Bifold doors aren’t very heavy, but they can be tall and a little awkward to handle. If possible, get someone to help you hold the panels steady so they don’t fall or bang into the wall.

Step 6: Clean the Track for Future Use

After the panels are out, look inside the top track. Dust, screws, or old paint can block the smooth motion of a door. Wipe the track clean and check for any leftover hardware. If you’re putting in a new door, this small step makes the installation go a lot easier.

Learn more about our aluminum bi folding doors.

How to Remove Bifold Closet Doors Without Bottom Track?

Closet bifold doors without a bottom track are pretty common in Los Angeles. Bedrooms, linen closets, and utility spaces all use this style. If you’ve got one, you’ve probably already tried removing it and gotten nowhere.

The process to remove bifold doors without bottom track from a closet is almost the same as above, but with one or two small changes that matter. The similar parts:

First, make some room. Pull clothes back. Clear the shoes. Make sure you can move freely.
Then follow the same process:
Open the closet doors all the way.
Look up and find the top track.
Find the pivot pin near the side of the frame.
Push the pin upward while gently tilting the door toward you.
Slide the roller or guide pin toward the open side of the track and remove it.
Lift the door out.

But here’s what’s different when you want to remove bifold doors without bottom track from a closet:

Closet bifold doors often have a snugger inside the track, a little plastic piece with a spring that holds the roller in place. If the roller feels stuck, it might be clipped into the snugger. You can push it past the snugger with a little extra force or press down on it with a flathead to release it.

Also, some closet doors have a bottom pivot bracket even if there’s no full track. Check the bottom corner near the frame. If you see a small bracket holding a pin, you’ll need to lift the door straight up to pop the bottom pin out before the top can come free.

Sometimes, the top track is deeper or covered in trim. You might have to wiggle the door out slowly if there’s trim hiding the pivot hardware. Don’t rush it, and be patient.

Once it’s out, set it aside and breathe. You did it. That’s how to remove bifold doors without bottom track from a closet.

Click and read more about our 90s outswing Teza bifold door.

Installation and Removal of Bifold Doors Without Bottom Track in Los Angeles, CA

Now you know how to remove bifold doors without bottom track. It might sound simple. And it is simple… most of the time.

But if the doors are heavy, old, stuck, or custom-made, it can be a different story. That’s where we come in. At TEZA Doors and Windows, we help homeowners all across Los Angeles remove, install, and upgrade bifold doors, with or without bottom tracks. We do assessments, custom fittings, and expert installs that make your space look clean and modern.

We know how to remove bifold doors without bottom track quickly and cleanly. No scratched walls. No wasted time. Just smooth, fast service you can count on. Call us or complete our FREE estimate form online here and get started.

FAQs