If your windows are hard to open, let in drafts, or bring in too much heat and noise, it may be time to upgrade. At TEZA Doors and Windows, we install energy-efficient custom windows in Burbank, CA, that help keep your home quiet, cool, and full of natural light, all while standing up to Southern California’s sun and weather. Our team helps homeowners find windows that open easily, look clean, and perform well all year long.
Types of Windows Installed
Our LA window company offers a wide variety of styles to match your space and needs:
|
Window Type |
What They Do |
|
Awning windows |
Open outward from the bottom to allow airflow during rain |
|
Bi-fold windows |
Fold and stack to create wide, open access to outdoor areas |
|
Casement windows |
Swing outward like a door to catch and direct fresh air |
|
Fixed windows |
Stay sealed shut while letting in natural light |
|
Fold-up windows |
Lift upward for a modern, space-saving window solution |
|
Hydraulic windows |
Use supported mechanisms for smooth, easy lifting |
|
Single-hung windows |
Slide vertically with a fixed top sash and movable bottom sash |
|
Sliding windows |
Move horizontally to open without taking up extra space |
|
Tilt and turn windows |
Tilt in for ventilation or swing in fully for easy cleaning |
If you are not sure what style is best for your home, reach out today for a FREE consultation on custom windows in Burbank.
Our Simple Window Installation Process
At TEZA Doors and Windows, we make the installation of our custom windows smooth and stress-free. We start with an in-home visit to take exact measurements. Then, we review window styles, energy ratings, and glass options to help you choose what fits best.
Next, we carefully remove your old windows, install your new custom units, seal everything tight, and test each window to make sure it opens and closes properly. We also clean up the work area so everything looks great.
The results are custom windows in Burbank that look good, fit perfectly, and help cut down heat, noise, and energy loss in your home.
Trusted Local Window Replacement Specialists in Burbank, CA
If your windows are fogged up, damaged, loud, or just not working, it might be time for a full replacement. Our licensed window installers will:
- Inspect your existing windows
- Check if a permit is required
- Remove the old window units safely
- Install new custom-fit windows with proper sealing
- Test everything and leave your space clean
Once the job is done, you’ll enjoy quieter rooms, improved insulation, and lower utility bills.
Custom Windows in Burbank, CA Cost
Most custom windows cost between $300 and $1,200 per window, based on the size, materials, and design. Large or specialty windows may cost more. If you want exact pricing, contact TEZA Doors and Windows for a FREE estimate based on your home and project details.
Top Doors in Burbank, CA
-
Teza HA Series – Aluminum Entrance Door
Doors Price range: $3,300.00 through $6,660.00 Select options This product has multiple variants. The options may be chosen on the product page -
Sale!
Liftmaster HD RJO 98032 Jackshaft Wallmount DC WiFi with Backup Battery by Liftmaster’s Exclusive Pro Channel
Doors Original price was: $999.00.$849.00Current price is: $849.00. Select options This product has multiple variants. The options may be chosen on the product page -
Sale!
Teza Frameless Garage Door
Doors Price range: $3,080.00 through $6,160.00 Select options This product has multiple variants. The options may be chosen on the product page -
Sale!
Teza Framed Garage Door
Doors Price range: $2,250.00 through $4,500.00 Select options This product has multiple variants. The options may be chosen on the product page
Do You Need a Window Permit in Burbank?
A permit is usually required when replacing the entire window unit, even if you’re installing the same size and style. Whether or not the window is visible from the street, the city may still require approval through the Building & Safety Division.
If you’re only replacing the glass and not the full window frame or structure, a permit is generally not needed. However, it’s always best to confirm with the city before starting your project.
At TEZA Doors and Windows, we help you determine whether a permit is required for the replacement of your custom windows in Burbank and handle the entire process to ensure your project follows all local codes and regulations.
Take a look at our sliding windows in Burbank. They are a practical choice for brightening up any room while saving space.
Window Code and Energy Compliance in Burbank
Most new and replacement custom windows in Burbank are required to follow California’s Title 24 energy standards. Title 24 is part of the California Energy Code and sets performance requirements for things like insulation, U‑factor, and how well windows limit heat gain or loss.
If your window project requires a building permit, the city will review Title 24 compliance as part of the permit approval process.
Even when a permit isn’t needed (for example, in limited maintenance cases), choosing energy‑efficient windows that meet Title 24 guidelines can improve comfort and reduce energy costs over time.
Every custom window we install is designed to meet or exceed these energy performance requirements to help keep your home comfortable and efficient.
Best Windows and Doors Company in Burbank
TEZA Doors and Windows is trusted by homeowners because our custom windows in Burbank are built to last, easy to maintain, and designed for the local climate. We offer expert installation, professional service, and real improvements in comfort and performance.
Visit us at one of our showrooms at 8210 Haskell Ave, Van Nuys, CA, or 4943 Telegraph Rd, Los Angeles, CA. Or, call us at (818) 818‑6001 or request your FREE consultation online today.
FAQs
Who makes custom size windows near me in Burbank?
TEZA Doors and Windows is one of the top providers of custom windows in Burbank. We offer custom-size windows made to fit your exact space. Contact us today for a free estimate!
How much does it cost to replace windows?
Prices vary based on size, material, and style. Contact us for an accurate quote.
How long does it take for custom windows to be made?
Custom windows typically take 3 to 6 weeks to manufacture, depending on the style and materials.
How far in advance should you schedule my window or door installation?
We recommend scheduling 2 to 4 weeks in advance to secure your preferred date.
How can you pay for a window replacement?
We accept major credit cards, checks, and offer financing options for qualified customers.
Best Windows in Burbank, CA
-
Garage Door Installation Service
Bi-Fold Windows Price range: $1,200.00 through $1,650.00 Select options This product has multiple variants. The options may be chosen on the product page -
TEZA (Hurricane Rated) Aluminum Awning Window with PVB Laminate Glass
Awning Windows $0.00 Select options This product has multiple variants. The options may be chosen on the product page -
TEZA (Hurricane Rated) Aluminum In-Swing Tilt and Turn Casement Window with PVB Laminate Glass
Casement Windows Price range: $1,200.00 through $1,920.00 Select options This product has multiple variants. The options may be chosen on the product page -
Teza Installation Kit
Bi-Fold Windows $299.00 Select options This product has multiple variants. The options may be chosen on the product page
